L4081A,B AND L6081A,C MULTIPLE AQUASTAT® CONTROLLERS
9
60-2105—07
Fig. 11. Setting stop shown in position to limit the high limit
setting to 180°F (82°C).
CHECKOUT
After completing installation and controller settings, operate
the system. Carefully observe the operation of all
components through at least one complete cycle. Be sure to
include a check of the high limit switch operation. Make any
correction needed; then repeat the checkout. Repeat until
system operates properly.
MATERIAL SAFETY DATA SHEET
Section 1. Product and Company
Identification.
Product Name: Heat conductive compound.
MSDS ID: DS9021.
Synonyms: MS1699.
Product Use: Heat conductive material used to enhance
contact and heat transfer in temperature sensor applications.
Manufacturer: Resideo Technologies, Inc., 1985 Douglas
Drive North, Minneapolis, MN 55422.
Date Released: October 8, 1999.
NFPA Ratings:
Health 0; Flammability 1; Reactivity 0;
Personal Protection B.
Section 2. Composition, Information on
Ingredients (Table 3).
a
Additional Information: Part No. 120650 (0.5 oz. tube); Part No. 107408 (4 oz. can); Part number 197007 (5 gallon container).
May also contain minute amounts of lithium and molybdenum lubricant compounds.
Section 3. Hazard Identification
Acute Health Effects:
Skin - Excessive contact can cause skin irritation and
dermatitis.
Eye - Direct contact with eye will cause irritation.
Inhalation - No adverse effects are expected.
Ingestion - Ingestion of product may cause nausea, vomiting
and diarrhea.
Chronic Health Effects:
Existing skin rash or dermatitis may be aggravated by
repeated contact.
OSHA Hazard Classifications:
None.
Carcinogenicity:
Not considered to be a carcinogen by either OSHA, NTP, IARC,
or ACGIH.
Target Organs:
None known.
220
200
160
140
180
SETTING STOP
SETTING
STOP ARM
PROJECTION "A"
KNOB SET AT 180 F (82 C)
M2844A
1
1
SCALE MARKINGS IN FAHRENHEIT ONLY.
Table 3. Ingredients of Heat Conductive Compound
a
.
Ingredients
CAS Number
Percent
PEL
TLV
No. 2 Lithium Complex Grease (70%):
Mineral Oil
64742-65-0
35-50
5 mg/m
3
5 mg/m
3
Mineral Oil
64742-62-7
20-25
5 mg/m
3
5 mg/m
3
Lithium Hydrostearate/Sebacate
Complex
68815-49-6
4-9
--
--
Zinc Alkyldithiophosphate
68649-42-3
0-2
--
--
Aluminum Paste (30%):
Aluminum, as Al
7429-90-5
20-25
15 mg/m
3
10 mg/m
3
Aliphatic Petroleum Distillates
8052-41-3
10-15
2900 mg/m
3
525 mg/m
3
Stearic Acid
57-11-4
1-2
--
--
Aromatic Petroleum Distillates
64742-95-6
1-2
5 mg/m
3
5 mg/m
3
