background image

Contents

Safety Section 

1

General Information 

3

To Start the Furnace 

4

Proper Maintenance 

6

The Problem Solver 

8

Regular Dealer Maintenance 

9

Warranty 11

WARNING

!

EXPLOSION HAZARD

DO NOT USE THIS UNIT IF ANY PART HAS BEEN UN-
DER WATER. A FLOOD DAMAGED UNIT IS EXTREME-
LY DANGEROUS. ATTEMPTS TO USE THE FURNACE 
CAN RESULT IN FIRE OR EXPLOSION. A QUALIFIED 
SERVICE AGENCY SHOULD BE CONTACTED TO IN-
SPECT THE FURNACE AND TO REPLACE ALL GAS 
CONTROLS, CONTROL SYSTEM PARTS, ELECTRICAL 
PARTS THAT HAVE BEEN WET OR THE FURNACE IF 
DEEMED NECESSARY.

FAILURE TO FOLLOW THIS WARNING COULD RESULT 
IN PROPERTY DAMAGE, PERSONAL INJURY OR 
DEATH.

WARNING

!

EXPLOSION HAZARD

IN THE EVENT THAT ELECTRICAL, FUEL OR MECHANI-
CAL FAILURES OCCUR, THE OWNER SHOULD IMME-
DIATELY TURN OFF THE GAS SUPPLY AT THE MANU-
AL GAS SHUT OFF VALVE LOCATED ON THE SUPPLY 
GAS PIPING COMING INTO THE FURNACE, TURN OFF 
THE ELECTRICAL POWER TO THE FURNACE, AND 
CONTACT SERVICER.
FAILURE TO  FOLLOW THIS WARNING  COULD  RE-
SULT IN PROPERTY DAMAGE, PERSONAL INJURY OR 
DEATH.

WARNING

!

If the information in this manual is not followed 
exactly, a fire or explosion may result causin

g

 

property dama

g

e, personal injury or loss of life.

— Do NOT store or use 

g

asoline or other flammable 

vapors and liquids or combustible materials in the 
vicinity of this or any other appliance.

— WHAT TO DO IF YOU SMELL GAS

• Do not try to li

g

ht any appliance.

• Do not touch any electrical switch;  

do not use any phone in your buildin

g

.

• Immediately call your 

g

as supplier from a 

nei

g

hbor’s phone. Follow the 

g

as supplier’s 

instructions.

• If you cannot reach your 

g

as supplier,  

call the fire department. 

— DO NOT RELY ON SMELL ALONE TO DETECT 

LEAKS. DUE TO VARIOUS FACTORS, YOU MAY 
NOT BE ABLE TO SMELL FUEL GASES. 
• U.L. reco

g

nized fuel 

g

as and CO detectors are 

recommended in all applications, and their 
installation should be in accordance with the 
manufacturer's recommendations and/or local 
laws, rules, re

g

ulations, or customs.

— Installation and service must be performed by a 

qualified installer, service a

g

ency or the 

g

as 

supplier.

Condensing Gas Furnaces
Fan Assisted Combustion System
Upfl ow/ Horizontal and Downfl ow/ Horizontal

User’s Information Guide

SAFETY SECTION

IMPORTANT:  Users MUST read all instructions in the manual. All manuals MUST be kept for future reference.

Safety signal words are used to designate a degree or 
level of seriousness associated with a particular haz-
ard.  The signal words for safety markings are 

WARN-

ING

 and 

CAUTION

.

 a. 

WARNING

 

indicates a potentially hazardous situa-

tion which, if not avoided, could result in death or 
serious injury.

 b. 

CAUTION

 

indicates a potentially hazardous situa-

tion which, if not avoided, may result in minor or 
moderate injury.  It is also used to alert against 
unsafe practices and hazards involving only prop-
erty damage.                

Available in French Canadian (FC)

32- 5035- 08

Содержание Condensing Gas Furnaces













Отзывы: