resi-linx digi-MOD IP RL-IP1000, Руководство по установке и настройке

Страница: 6 / 22

resi-linx.com Page 6
Front
‐
Panel
Buttons/LEDs
Description
Reboot button Reboots the device (unsaved settings will be lost)
RST / UPG button To reset all the settings of the device to factory default:
1.Press and hold the RST/UPG button and boot-up the device
2.Hold the button until CFG led to flashes 10 times (about 10 seconds)
3.After the CFG led stops flashing release the button
To upgrade firmware using the USB port:
1.Plug-in the USB drive with the upgraded firmware image
(“hdip_upg.img”)
2.Press and hold the RST/UPG button and boot-up the device
3.USB led will flash while copying the image from USB drive (about 3~5
seconds)
4.Wait until the CFG led stop flashing
5.Release the RST/CFG button and wait for the device to reboot and
upgrade the firmware (about 1 minutes)
PWR Power is ON
CFG Indicates device is in configuration mode
USB Indicates USB drive is mounted
MPEG-2 Indicates device is encoding video using MPEG-2
AVC Indicates device is encoding video using AVC
MP2 Indicates device is encoding audio using MPEG-1 Layer 2
AAC Indicates device is encoding audio using AAC
AC-3 Indicates device is encoding audio using AC-3