manualshive.com logo in svg

Resco StormCube, Руководство по установке

Поделиться
Скачать
Resco StormCube Скачать руководство пользователя страница 7

Resco StormCube WW version. Step-by-step Installation Guide.  January 2018

      

7

Step 

7

Step 

8

From the Resco Shop drawings, mark the full stile 

centres on the chalk line.
Note: make sure to leave enough pencil mark along the 

chalk line to be seen from under the full stile footprint.  

This is so you can ensure the panels will be centred.

Floor mounted bracket positions are located by placing 

a small off cut of the Full stile over the full stile centres 

you marked in the previous step.  Ensure you have 
the correct orientation, by checking the Resco Shop 

Drawings to ensure the full stile is orientated correctly.
Then place the floor mounted bracket into position and 

Fix in place.

Use 5mm Masonry drill bit in concrete 

floor and 3.5mm drill bit in wood floor or a 

diamond drill bit for tiles.
Place (F) plastic anchor in hole.

Secure floor block, using (A) 8gax32 screws.

Trim Style to fit

Step 

9

Full-Stiles

Use a laser level (or string line) between the tops of the 
½ Stiles. 

a.  

Trim all full Stiles to height, by putting each full Stile 
upside down over the appropriate floor mount, mark 

and then trim.

Floor mount brackets located in position. (Indicative only. Not to scale.)

WALL TO WALL VERSION

Содержание StormCube























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды