manualshive.com logo in svg

Resco StormCube, Руководство по установке

Поделиться
Скачать
Resco StormCube Скачать руководство пользователя страница 11

Resco StormCube WW version. Step-by-step Installation Guide.  January 2018

      

11

Resco Limited. 
12 Kahu Crescent 
Te Rapa Park, Hamilton 3200. New Zealand 
Phone: 0800 800 950, +64 850 1025 
Fax: +64 7 850 1026 
(www.resco.co.nz)

©Resco April 2017

Step 

18

  Fit hardware

COAT HOOK 

Line up the coat hook with the pre-drilled holes in the 
doors and screw on. 

Use (B) 8GA x 12 screws.

INDICATOR BOLT

Step 01 - Front Component Coat Hook 

Step 02 - Diamond Back Plate

Step 03 - Inside Bolt

Step 04 - Coverplate, Knob & Keeper

Insert the green and red plate into the inside of 
the front component of the indicator bolt.

Fix the front part of the indicator bolt to the outside of 
the door using the diamond back plate on the inside of 

the door. 

Use 2 x 8g x ½ screws.

Insert the hexagon shaped spindle into the front plate 
from the inside.

Check the indicator is green and then check the bolt 
lock is in the Open position.

Screw the inside bolt component onto the inside of the 

door over the Diamond Back Plate.

Use 4 x 6g x 20mm screws.

Check that the lock can slide back and forth smoothly. 

In case it jams it means that the hexagon spindle is not 

perfectly perpendicular. You will need to gently slide the 
front of the indicator left/right.

Fix the indicator bolt in the pre-drilled position. 

Step 

17 

 Hang doors

Lining up the hinges attached to each stile with the 
predrilled holes on the doors, hang the doors. 

Use the supplied (B) 8GA x 12 screws. 

WALL TO WALL VERSION

Step  

19  

Clean Panels

Clean all components, including pencil marks on 

the floor and walls. 
Sweep the floor and remove rubbish. 

Wipe down with soapy water.

Then clip on the cover plate. Push on the knob and 
tighten the grub screws with the allen key supplied. 
 A keeper will already be installed on the Stile.

Содержание StormCube























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды