Rescea RVH-AXP35-LCD, Руководство пользователя

Страница: 12 / 20

2. Making sure the cover is resting evenly on port, push the cover into the port until it is fully
seated.
3. Rotate cover clockwise until it stops with an audible “click” as the LCD Port Lock Button
engages.
USING THE VIEWFINDER
The housing Viewfinder is interchangeable with INON 45°Viewfinder Unit, no modification or
adapter required.
※
Once housing is properly closed perform Pre-Dive Check using Airlock Vacuum System
while testing camera and housing functions. Pre-Dive Check may also be conducted by
immersing housing several times, starting with short intervals, gradually lengthening time,
checking for water leakage after each intervals while testing camera and housing
functions.
※
When entering water use a method of water entry that protects the housing from shock,
which can cause water leakage. If at all possible have Housing handed to you after
entering the water.
※
After use in salt water, wash off salt and other contaminants by soaking empty Housing,
with Back Cover properly attached, thoroughly in a bucket of fresh water (lukewarm) for 10
to 20 minutes. Manipulate all buttons and dials several times to flush out salt deposits and
other contaminants.
※
After use always conduct proper housing, O-ring and O-ring contact surface maintenance.
AIRLOCK VACUUM SYSTEM
The RVH-AXP35 comes equipped with an Airlock Vacuum System to conduct Pre-Dive
checks without having to submerse the housing in water. In addition to checking seals this
system also acts as a second lock for LCD Port, LCD Port Cover and housing Back Cover.
※
Always replace Vacuum Valve Plug prior to submersion in water.
11