Rescea RVH-AXP35-LCD, Руководство пользователя

Страница: 10 / 20

※
Gently tuck access cable into housing so that it does not cause an obstruction when
attaching the back cover.
※
Please perform proper O-ring and O-ring Contact Surface maintenance prior to attaching
and closing the back cover. Pay special attention to the grease condition making sure the
O-ring is free of contaminants and seated uniformly in the O-ring groove with no twists or
bulges.
6. Carefully place back cover onto housing main body. Press Secure-Latch (2) on both
sides making sure the latch on the underside is properly placed in the Secure-Latch
Groove (1) on both sides of the back cover. Push into the locked position. Double
check to make sure both Secure-Latchs are firmly locked into place.
INSTALLING LCD PORT (RVH-AXP35-LCD)
※
Please conduct the following operations in a clean area with low humidity and dust.
※
Please perform proper LCD Port O-ring and housing port contact surface maintenance
prior to installation.
1. Pull LCD Dial on the LCD Port outward so that it does not cause an obstruction.
2. Place LCD Port over Housing Port aligning the tabs of the LCD port with the Housing Port
as shown on the next page.
9