background image

www.reptileone.com.au

Product Information Sheet

THIS HEAT MAT IS DESIGNED TO BE USED WITH GLASS ENCLOSURES ONLY.

 

1.  Reptile One Heat Mats are designed with plastic stick on feet. Remove the feet from the paper and attach them to the 

corners of the enclosure. The 14W and 20W models are supplied with 6 feet, the extra feet should be placed half way along 
the longest edges of the enclosure.

2.  Attach the mat under the enclosure in the desired location by taping the transparent edges of the mat to the underside of 

the enclosure and switch the mat on at the power outlet.

Installation

Notes, Hints & Tips

1.  It is important that the heat mat does not cover more than 1/4 to 1/2 of the base area of the enclosure.
2.  The mat should not be placed directly beneath another heat source such as a heat lamp. Reptile One Heat Mats are 

designed to operate 24/7 to provide a thermal option for the reptile.

3.  All models include a built-in thermal cut off which means the mat does not need to be run on a thermostat.  With the 

thermal cut off set to 50°C, this should provide temperatures in the 30’s once the heat has travelled through the glass 
and a thin layer of substrate, providing adequate heat to keep your reptile warm. Ensure an adequate thermal gradient is 
provided in your environment design for the species being housed.  

 

 

Warnings & Disclaimers:

1.  This appliance in not intended for use by children or infirm persons without supervision. Young children should be supervised 

to ensure that they do not interfere with the appliance.

2.  Do not operate product if it has a damaged cord or plug.
3.  Always unplug the mat from the electrical outlet when not in use, before putting on or taking off parts, before any type of 

maintenance or cleaning.

4.  This product is not designed to be used in water and should be kept dry at all times. do not install or store the product where it 

will be exposed to weather or temperatures below freezing

5.  Ensure input voltage is the same voltage as your power supply.
6.  A Ground fault circuit interpreter and surge protector is recommended for all appliances.
7.  If in doubt about the electrical installation or safety of this product, you must consult a qualified technician.
8.  Misuse of this heat mat or failure to follow instructions as  directed by the manufacturer will result in the warranty being voided.
9.  Should Reptile One Heat Mats be used with any other enclosure other than glass terrariums, the warranty of this heat mat is null 

and void. 

This Heat Mat MUST only be used on the outside of glass terrariums as directed.

Отзывы: