3.6
Status
3.6.1
Device Info
This page displays the current information for the ADSL Router. It will display the Firmware
version, LAN, WAN, and MAC address information.
Item
Description
Line State
This field displays the ADSL connection process and status.
Modulation
This field displays the ADSL modulation status for G.dmt or T1.413.
Annex Mode
This field displays the ADSL annex modes for Annex A or Annex B.
Max Tx Power
This field displays the transmit output power level of the ADSL Router.
SNR Margin
Amount of increased noise that can be tolerated while maintaining the designed
BER (bit error rate). The SNR Margin is set by Central Office DSLAM. If the
SNR Margin is increased, bit error rate performance will improve, but the data
rate will decrease. Conversely, if the SNR Margin is decreased, bit error rate
performance will decrease, but the data rate will increase.
Line
Attenuation
Attenuation is the decrease in magnitude of the ADSL line signal between the
transmitter (Central Office DSLAM) and the receiver (Client ADSL Modem),
measured in dB. It is measured by calculating the difference in dB between the
signal power level received at the Client ADSL Router and the reference signal
power level transmitted from the Central Office DSLAM.
Data Rate
This field displays the ADSL data rate.
