Repotec RP-UPH104T, Руководство пользователя

Страница: 17 / 41

5. UPS Operation
5.1 Check prior to start up
1. Ensure the UPS is in a suitable positioning.
2. Check input cord is secured.
3. Make sure the load is disconnected or in the “OFF” position.
4. Check if input voltage meets the UPS rating required.
5.2 Start-up procedure for LCD model
Please follow the instructions below for UPS operation.
1. Once the AC source is
connected, the LCD Display
shall light up immediately to
display first the main menu of
greeting context and the
Normal LED is blinking to
indicate ready to switch on the
inverter.
2. By pressing the Enter-key and the Down-key simultaneously for 3
seconds, the UPS will start up after two beeps and Normal LED lights
up to indicate the power is from its inverter to the load.
3. When the Down-key and the Up-key are pressed simultaneously for
3 seconds, the inverter will be turned off after two beeps and the UPS
is on the standby status (LCD display illuminates and Normal LED is
blinking) until AC source is disconnected.
16