Publication date: Nov., 2012
Revision A1
2
1. Introduction
1-1. Overview of 9-Port GbE Web Smart PoE Switch
The 9-port Gigabit Web Smart PoE Switch is a standard switch that meets all
IEEE 802.3/u/x/z Gigabit, Fast Ethernet specifications. The switch has 8
10/100/1000Mbps TP ports and 1 Gigabit SFP transceiver slot, It supports http and
SNMP interface for switch management. The network administrator can logon the
switch to monitor, configure and control each port’s activity. In addition, the switch
implements the QoS (Quality of Service), VLAN, and Trunking. It is suitable for
office application.
Others the switch increase support the Power saving for reduce the power
consumption with "ActiPHY Power Management" and "PerfectReach Power
Management" two technique. It could efficient saving the switch power with auto
detect the client idle and cable length to provide different power.
10/100/1000Mbps TP is a standard Ethernet port that meets all IEEE
802.3/u/x/z Gigabit, Fast Ethernet specifications. 1000Mbps SFP Fiber transceiver
is a Gigabit Ethernet port that fully complies with all IEEE 802.3z and 1000Base-
SX/LX standards.
1000Mbps Single Fiber WDM (BiDi) transceiver is designed with an optic
Wavelength Division Multiplexing (WDM) technology that transports bi-directional
full duplex signal over a single fiber simultaneously.
•
Key Features in the Device
QoS:
The
switch
offers powerful QoS function. This function supports 802.1p
VLAN tag priority and DSCP on Layer 3 of network framework.
VLAN:
Supports Port-based VLAN, IEEE802.1Q Tag VLAN. And supports 9 active
VLANs and VLAN ID 1~4094.
Port Trunking:
Allows one or more links to be aggregated together to form a Link
Aggregation Group by the static setting.
Power Saving:
The Power saving using the “EEE"
、
"ActiPHY Power Management" and
"PerfectReach Power Management" three techniques to detect the client
idle and cable length automatically and provides the different power. It could
efficient to save the switch power and reduce the power consumption.
PoE:
9-PoE ports allow power to be supplied to end devices, such as Wireless
Access Points or VoIP Phones, directly through the existing LAN cables,
eliminating costs for additional AC wiring and reducing Installation Cost. It
was compliant with IEEE802.3af standard. It provides the endpoint with 12
VDC power through RJ-45 pin 1, 2, 3, 6. Others the GEPoESM-SW09.060
