2
Front Panel
LED indicators
For definitions of LED indicators, please refer to the following table:
LED
Status
Indication
PWR
On/Green
Power is On
Off
Power is off
UpLink
On/Green
Uplink port is in connection
Blink/Green
Receiving or transmitting data
Off
No device attached
ACT
Port1~8
On/Green
The Ethernet port is connecting with the device
Blink/Green
Receiving or transmitting data
Off
No device attached
PoE
Port1~8
On/Orange
PoE port is active
Off
PoE port is not active
Back Panel
Power Switch and Power Cord Connector
Hardware Installation
The setup of the switch can be performed using the following steps:
Step 1: Connect the Power Cord to the POE switch and then to a power outlet
Step 2: Connect a RJ-45 Ethernet cable from IEEE802.3af/at compliant devices (PD) to an
available PoE port
Note
: Port 1 to Port 8 are used for connecting to PD or PoE splitter for end devices.
