Connecting to Power
1.
This Converter is a plug-and-play device.
2.
Connect the supplied AC to DC power adaptor
with a power voltage of 7.5Vdc/1.5Amp to the
receptacle on the rear panel of the converter, and
then attach the plug into a standard AC outlet
with a voltage range from 100 to 260 Vac.
Dip Switch
There is a dip switch for duplex mode setting for fiber
port. Refer to the table below for more details.
Switch 1 : On -> Fiber Half Duplex
Off -> Fiber Full Duplex
1
ON
On Half
Duplex
Off
Full Duplex
(default)
6
