Repose Lynton Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 26

Repose Lynton Скачать руководство пользователя страница 10

18

19

The Lynton comes with a removable waterfall back cushion as standard, but with the option to
select other removable and interchangeable back cushion configurations.

Key Features:

Back Cushion Adaptability

• All cushions can be interchanged and repositioned for

comfort and posture management. With the waterfall
back cushions the largest cushion sits at the top of the
back frame. To reposition the back cushions simply pull
away from the back where they are positioned using
Velcro strips and then reposition as required.

• Each of the fibre filled cushions comes with a zip that

will enable fibres to be added or taken away to adjust
the level of firmness and also to remove the covers for
cleaning and replacement.

Seat depth adjuster pads

There is also the option of purchasing seat adjuster pads
which can further reduce the seat depth by either 25mm
(1'') or 50mm (2'') depending on which pads are chosen.
They simply fit behind the Velcro strips, as the image
demonstrates.

Seat Cushion Adaptability

REAR

This Way

Up

IMP

ORT

A

N

T

The Lynton comes with an Easiform seat cushion as standard, but with the option to select from our
range of interchangeable seat cushions (see page 49). To change the seat cushion, chaise or cover
slip, firstly remove the back cushion. Then release the chaise from the Velcro strips, as shown below.
The seat cushion can then, be simply lifted from the seat frame. Always ensure that when fitting the
seat cushion that the “This way up label” sits at the back of the seat and is visible on the top.

Seat chaise and cover

The Lynton benefits from a single, full seat cover and chaise which removes any pinch
points and reduces the risk of pressure areas developing because of them. To remove
firstly take off the back cushion. Then at the back of the seat cushion release the chaise
from the Velcro and peel off the chaise (Image 3). The chaise is also secured by Velcro to
the front of the seat and under the footplate, again simply peel off (Image 4).

Image 3

Image 2

Image 1

Image 4

«
...
8
9
10
11
12
...
»

Содержание Lynton



























Отзывы:

Нет отзывов