4
All settings and registered admin & user numbers are saved in device’s own EPROM memory. So, settings
will not be deleted if battery or SIM card is removed. Device will continue with new batteries or new SIM
Card with the last saved settings & numbers.
2.
GETTING STARTED
2.1.
Insert SIM Card
A local SIM card is required to operate the system. Before inserting the SIM card, try it with a mobile
phone. And then:
o
Disable PIN code protection
o
Send an SMS to a mobile number for testing
o
Call a mobile phone number for testing
After above steps; please open the screws on the back of the item. And please insert SIM card into
your device, by opening the SIM card holder. Once SIM card is inserted, please lock the holder.
2.2.
Connect Sensors on Ports
Note: Wires should pass into the holes of the top cover! Please check Wiring Diagram!
NO PORT (Port1): Connect two wires of your NO type device output or cable into terminal block 5 & 6.
It does not matter which one is first. This port is a “Normally Open” port and checks if there is any
short-circuit between terminal 5 & 6.
