Installation
4
4.1 Selecting Mounting Location
Do not mount the inverter on flammable construction
materials.
Mount on a solid surface.
This inverter can make noise during operation which may be
perceived as a nuisance in a living area.
Install this inverter at eye level in order to allow the LCD
display to easily be read.
For proper air circulation to dissipate heat, allow a clearance
of approx. 20 cm to the side and approx. 50 cm above and
below the unit.
Dusty conditions on the unit may impair the performance of
this inverter.
The ambient temperature should be between 0°C and 40°C
and relative humidity should be between 5% and 85% to
ensure optimal operation.
The recommended installation position is to be adhered to
(vertical).
For proper operation of this inverter, please use appropriate
cables for grid connection.
The pollution degree of the inverter is PD2. Select an
appropriate mounting location. Install the solar inverter in a
protected area that is dry, free of excessive dust and has
adequate air flow. Do NOT operate it where the temperature
and humidity is beyond the specified limits. (Please see
specifications for limits).
The installation position must not prevent access to
disconnects.
This inverter is designed to IP20 specifications and is for
indoor applications only.
Regularly clean the fan filter.
5
6
WARNING!
Remember that this inverter is heavy! Please be
carefully when lifting out of the package.
WARNING!!
FIRE HAZARD.
SUITABLE FOR MOUNTING ON CONCRETE OR OTHER
NON-COMBUSTIBLE SURFACE ONLY.
Consider the following points before selecting where to install:
Installation to the wall must be implemented with the
appropriate screws and the inverter must be affixed securely.
1.
Drill four holes in the
marked locations with four
screws. Vertical distance
between holes 320mm and
horizontal distance 416.5mm.
2.
Place the unit on the surface
and align the mounting holes
of the inverter with the four
drilled holes.
The inverter only can be used in a CLOSED ELECTRICAL
OPERATING AREA.
4.2 Mounting Unit
3.
Ensure that the solar
inverter is firmly secured.
Note:
Recommended
specifications for screws.
416.5
320
