KrosFlo® TFF System – Auxiliary Scale ACSS-60K
User Guide
30 repligen.com 420-14871-002 Rev. 00
In the case of hard to remove contamination, e.g. residues of adhesive, rubber, resin, polyurethane
foam etc., you can use a special cleaning agent based on a mixture of aliphatic hydrocarbons that do
not dissolve plastics. Before using the cleanser for all surfaces, we recommend carrying out tests. Do
not use cleansers containing abrasive substances.
19.2
Cleaning stainless steel components
Avoid using cleansers containing any corrosive chemicals, e.g. bleach (including chlorine). Do not use
cleansers containing abrasive substances. Always remove the dirt using microfiber cloth to avoid
damage of protective coating.
In case of a daily maintenance:
•
Remove the dirt using cloth dipped in warm water
•
For best results, add a little bit of dishwashing detergent
19.3
Cleaning aluminum components
While cleaning aluminum components use products acid by nature, e.g. spirit vinegar, lemon. Do not
use cleansers containing abrasive substances. Avoid using hard brush, this may cause scratches. It is
recommended to use microfiber cloth. While polishing the surface use circular movements. Use
clean, dry cloth to make the surface shine.
