Page 8(17)
VLAN:
Indicates if and what VLAN all data traffic is
associated with. VLAN 0 means that no VLAN is
used. All traffic sent on the radio interface will be tagged with
this VLAN.
Method:
Shows if the WAN IP is static or if it should get an
IP address with DHCP.
IP address:
Shows the current IP address on the WAN port.
This is the IP-address delivered by or assigned by
the ISP.
Netmask:
The current net mask for the WAN port.
Gateway:
The current gateway address for the WAN port.
Primary/Secondary DNS:
This is the DNS address used by the SU for
DNS queries.
Commands
DHCP Release:
By pressing this button the SU will release its current IP-
address.
DHCP Renew:
By pressing this button the SU will try to renew the IP-
address.
Refresh:
By pressing this button the SU will update the status page.
Basic tab
The Basic tab holds configuration parameters regarding the connection. At the top you find the
“SiteSurvey” result area. Here the result of a SiteSurvey is presented. When the CPE isn’t connected with
an AP this area will present the CPEs current list of APs that it hears. If the CPE is connected to an AP and
you want to know what other APs that are in range you need to perform a SiteSurvey to update this list.
Left click with the mouse over the Site Survey button. To choose a particular AP to connect to click on the
BSSID and the fields will automatically be filled in with the correct values, then press apply.
Radio Settings
Frequency:
Choose which frequency mode should be used. 802.11a means
5 GHz. 802.11b and 802.11g uses 2.4 GHz. (only SU5411abg)
Rate:
Configures which rate the SU should use when transmitting
frames. Auto means that it automatically chooses the best rate
depending on the quality of the radio connection.
SSID:
This is the SSID of the base station that the SU wants to
connect to.
BSSID:
If several base stations have the same SSID you could force
the SU to connect to a particular base station by entering it
BSSID.
