REPA ECO, Инструкция по эксплуатации

Страница: 7 / 44

7
SET UP
ADJUSTMENTS
IMPORTANT
During the set up procedure, if no button is pushed for 5 seconds the display will automatically show current time and the system
will set to the operating stage
IMPORTANT
This adjustment is generally made by the manufacturer, though from the time of regeneration to that of installation it could reset.
For the adjustment strictly follow the indication of the table of litres of resin contained in the machine (see table 1).
warning
warning
TIME ADJUSTMENT
Push the icon button until the display shows current time. The button only allows setting the hour until 11:00 p.m., than
it goes back to 00:00. The default time is 00:00.
REGENERATING QUANTITY ADJUSTMENT
REGENERATION FREQUENCY ADJUSTMENT
Push the icon button until displaying the following options:
.3 ) Regeneration frequency every 8 hours (3 times per day). At 2:00 a.m., 10:00 a.m. and at 6:00 p.m.
.5 ) Regeneration frequency every 12 hours (2 times per day). At 2:00 a.m. and at 2:00 p.m.
1-30 ) With the value set at 1, you will have a daily frequency, with 2 the regeneration will start every 2 days and so on until
the value of 30, with a regeneration every 30 days. The regeneration will always start at 02:00 a.m.
Push the icon button until the display shows the value derived from the table attached.
MANUAL REGENERATION
DELAYED REGENERATION
For a delayed regeneration, push the
con button and release it immediately.
In this way, a delayed regeneration will be set, at 2:00 a.m. of the following day, independently from the regenerations already
set. A flashing dot will be displayed next to the time to confirm the correct set up.
To cancel this set up, push the button again.
IMMEDIATE REGENERATION
For an immediate regeneration keep the
icon button pushed for 3 seconds.
The display will show ( - - ) in vertical cascade, indicating the counter washing stage processing.
For each stage
C2 - C3 etc. will be displayed until the regeneration is complete has been completed.
To scroll the regeneration cycle after having launched manual regeneration, push and release the and buttons at the
same time until the display shows the following cycle.
To reset the regeneration programme and go back to the operating stage push the
and icon buttons at the same time
for 3 seconds.