Operating Instructions
REOVIB 51310
2
1.0 Description
Track control units for regulating the material reservoir on a feed track. Nearly all propriety initiators,
active light barriers or Namur transducers can be installed. The switching characteristics (PNP / NPN –
output) can be adjusted on a front panel selector.
2.0 Function
The material demand is controlled by a sensor, the signal of which passes through two, independent,
variable time delays (on and off switching delays), before enabling the output, which, for example,
actuates the thyristor control.
If the sensor is uncovered (No reservoir build up) and the adjustable switch on time delay has expired, the
513 enables the power output of a thyristor controller. When the components cover the sensor, the switch
off time delay starts and after this expires, the power output of the thyristor control is switched off. Gaps in
the material flow are subject to control by the i ntegral timers, so that there is consistent timing between
the last component and the first component.
The on and off switching time delays can be adjusted with trimmers on the front panel of the unit, within
the range of 0.5 – 15 seconds. The status of the sensors (energised/de-energised) and also the enable
output (on/off) is indicated on LED’s.
A relay switches changeover contacts, in addition to the enable output, and this is brought out to
terminals. These contacts can be used to initiate other processes or supervisory equipment.
3.0
Technical Data
Gerätetype
Supply Voltage
230 V +6% -15%, 50/60 Hz (110V Optional)
Sensor operating Voltage approx. 24 V, DC
Sensor types
Inductive, Capacitive, Namur, Active Light Barriers
Switching Characteristics PNP, NPN switchable
Sensor Current
100 mA
Switch on delay
0.5 – 15 secs
Switch of time delay
0.5 – 15 secs
Anbient temperature
0 –45
°
C
Dimensions (l x w x h)
80 x 45 x 114
Relay contact
2 A / 250 V
Screw or Snap fixing (DIN rail EN 50022-35)
Touch protection to VBG 4
4.0 Declaration of Conformity
We declare that these products, as stand-alone equipment, conform to the following standards
or subsequent documents: EN 50081-2 and EN 50082-2 in accordance with 89/336/EWG
regulations.
REO ELEKTRONIK GMBH, D-42657 Solingen
