Operating Instructions
REOTRON MEW
REO
UK LTD
2
ELEKTRONIK
ELEKTRONIK
ELEKTRONIK
ELEKTRONIK
Technical Safety Information for the User
This description contains the necessary information for the correct application of the product described
below. It is intended for use by technically qualified personal.
Qualified personnel are persons who, because of their training, experience and position as well as
their knowledge of appropriate standards, regulations, health and safety requirements and working
conditions, are authorised to be responsible for the safety of the equipment, at all times, whilst carrying
out their normal duties and are therefore aware of, and can report, possible hazards (Definition of
specialist according to IEC 364).
Safety Instructions
The following instructions are provided for the personal safety of operators and also for the
protection of the described product and connected equipment.
Warning!
Hazardous Voltage
Failure to observe can kill, cause serious injury or damage
•
Isolate from mains before installation or dismantling work, as well as for fuse changes or post
installation modifications.
•
Observe the prescribed accident prevention and safety rules for the specific application.
•
Before putting into operation check if the rated voltage for the unit conforms with the local
supply voltage.
•
Emergency stop devices must be provided for all applications. Operation of the emergency
stop must inhibit any further uncontrolled operation.
Prescribed Use
The units described herein are electrically powered for use in industrial applications. They are
designed for power adjustment of resistive or inductive loads.
!
