Renz Upsite U05, Руководство по сборке и эксплуатации

Страница: 16 / 28

9) Assembly of cable channel (A;B)
Screw the cable channel (6 direct fixing screws 6.3 x 19mm flat head) to the prepared position on the table top and
check the alignment. The front locks must lock almost automatically.
To open the channel, slide the side wall (horizontal, red arrow) inwards. To close, gently push the channel
upwards (vertical, green arrow).
Attention: Opening and closing are done without effort.
Insert the end covers left and right into the channel profile. Always remove the covers before opening the
cable channel.
(Magnets inwards)
Upsite
Assembly
16