__________________________________________________________________________________
© Chr. Renz
MRB
16/23
5.4.2 End charging process
1. The charging process is terminated by the vehicle. (Multi-colour LED: OFF).
2. The charging plug must be removed from the vehicle and the protective cap must be pushed
onto the charging plug.
3. The charging cable must be rolled up around the POWER2CAR FUEL Wallbox charging stati-
on.
Info:
For details on how to end the charging process on the vehicle, please refer to the vehicle manu-
facturer's instructions.
6. Maintenance
6.1 Annual
Checking the residual current device by pressing the test button on the DC monitor.
Checking the charging cable and charging plug for mechanical defects.
Checking the operation of the multi-colour LED.
Danger
:
If the charging station is operated in public areas, additional maintenance must be car-
ried out in accordance with the DGUV regulations!
Danger:
Defective or damaged components must be replaced immediately!
Danger:
Only use original spare parts!
