__________________________________________________________________________________
© Chr. Renz
MRB
11/23
6
Dip switch
(Must be set according to Table 4 during installa-
tion.) (see chapter 4.8.)
7
Release from car (white wire)
(When charging plug is in the car)
8
Charging cable with type 2 plug
(Mounted on delivery)
9
Fine-wire fuse 5 x2 0
1A slow-blow
10
Communication interface K1
RS485
11
Power LED lights up
Power supply o.k.
12
Run LED flashes
Processor in operation
Table 3
.
4.7 Release contact
At the factory, the charging station POWER2CAR FUEL is equipped with a wire jumper between "+"
and "IN" of the terminal strip (table 3 no. 2) of the charge controller. On the customer side, this connec-
tion can be used for an external charging release. In this case, an external potential-free contact con-
trols the charging release (e.g. RFID scanner or similar).
