3
5
Punch
Punch max 30 pages 20#
stock, for comfortable
punching: 15 – 20 pages
Punch plastics and thicker covers
separately.
Insert paper into punching
slot, slide the paper against
the paper guide
Adjust 11” format at the right
side, paper must stand evenly, if
not align it again
Adjust 8.5” format at the left
side.
Press punching level
forward until it stops,
then return to original
position.
Hold the machine with the other
hand.
6
Insert
Remove punched paper
from the punching slot.
Insert paper onto the
binding element
For thicker books, repeat steps five and six until all
pages are punched.
7
Adjust
Press clamping fixture
After the paper had been
placed on the binding
element, remove the paper
with the element from the
clamping fixture.
Hold the paper that it does not
slide out of the binding element.
Put binding element under
the closing bar.
Binding element must
stand vertically at the
back of the closing bar
With opening of the binding
element to the book.
8
Close
Press binding lever
forward until it stops and
back again
For bigger diameters use more
force.
Proper bind
Binding under closed:
Adjust closing bar a little
deeper
Release attachment screw and
move it slightly to the left. Fix
attachment screw. Press binding
lever again.
Binding over closed:
Adjust closing bar a litter
higher
Release attachment screw and
move it slightly to the right. Fix
attachment screw. Close next
book.
9
Ready
Turn back cover over
Ready
