manualshive.com logo in svg

Renz AB500HS, Руководство пользователя

Поделиться
Скачать
Renz AB500HS Скачать руководство пользователя страница 7

 AB500HS

 

General Safety Instructions

 page 

6

 

5  General Safety Instructions 

5.1  User´s Duty of Care 

 

•

 The 

RENZ

®

 AB500HS

 binding machine has been designed and built after 

careful selection of the harmonised standards to be complied with and of 
other technical specifications. It is state-of-the-art technology and enables a 
very high degree of safety during operation. 

•

  Machine safety can however only be converted into operational practice if all 

the action required for this has been taken. The planning of this action and 
the control of its implementation fall under the duty of care of the user of the 
machine. 

The user must especially ensure that 

•

  the machine is only used as intended. 

•

  the machine is only operated in perfect working order and the safety 

equipment in particular is regularly inspected as regards its fitness for 
operation. 

•

  necessary personal protective equipment for operating, maintenance and 

repair personnel is available and is worn. 

•

  the operating manual is always in a legible condition and is fully available at 

the site the machine is used. 

•

  only qualified and authorised personnel operate, maintain and repair the 

machine. 

•

  this personnel is regularly trained in all relevant matters of Health and Safety 

and Environmental Protection, as well as knowing the operating manual and 
in particular the safety instructions contained in it. 

•

  all safety instructions and warnings applied to the machine itself are not 

removed and are legible. 

5.2 Safety 

Instructions 

In this operating manual concrete safety instructions are given to indicate the residual risks that cannot 
be avoided when operating the machine. These residual risks include risks to 

•

 

People, in particular the operating personnel 

•

 

Product and machine 

•

 Environment 

5.3  Description of symbols 

Symbols indicated below are used in the appropriate place in the operating manual to indicate notably 
the named residual risks! 

 

Danger

 

This symbol indicates that there are, above all, hazards to people! 
(Danger to life, risk of injury) 

 

Caution 

This symbol indicates that there are, above all, hazards to machine, material and 
environment! (Damage, collision, loss of data) 

 

This symbol indicates that there are, above all, hazards to people by electricity. 
(see also information chapter 5.7) (Danger to life, risk of injury and risk of fire) 

Содержание AB500HS





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды