Renz AB500HS, Руководство пользователя

Страница: 28 / 52

AB500HS
Handling of the touch-screen-display page
11.4 Example 3 for 3:1 pitch (skip binding)
Information
•
The AB500HS permits to bind skip bindings. By means you can bind your book with
several short Ring Wire

elements. The maximum of skip elements is 10.
•
The distance between the elements could be also 0 by means there is no space between
the elements. A value of 0 for the first numeric field (distance from the knife to the first
loop section) is not possible.
Now we want to bind a book in A4 size with a thickness of about 8,5mm. In this case you can use a 3:1
pitch RENZ Ring Wire

with a diameter of 7/16”. We want to divide the book into 5 binding elements by
means we need 5 elements with 4 loops and 4 times space with value 3. Because of the longer distance
of the loops to the paper edge we need a value of 4 for the distance to the knife.
1. Switch on the AB500HS
2. After the starting screen appears please push the „next“
button. Now you are in the set up screen.
3. Push the 1
st
number
c
at the left side. The input box
appears. Type in 4. This is the distance from the knife to
the 1
st
loop section. Confirm the value by pushing the
“ENT” button. The input box closes and the value appears
in the 1
st
field c .
4. Push the 2
nd
number d and type in 4 for the 1
st
number of
loops. Confirm the value by pushing the “ENT” button. The
input box closes and the value appears in the 2
nd
field d .
Information
•
3:1 elements with less than 4 loops do not work.
•
2:1 elements with less than 3 loops do not work.
•
A value of "0" for the first numeric field (distance from the knife to the first loop section) is
not possible.
5. Push the 3
rd
number e and type in 3 for the 1
st
space. Confirm the value by pushing the “ENT” button.
The input box closes and the value appears in the 3
rd
field.
6. The display should show the same information as the sketch beside.
7. Push the 4
th
number f and type in 4 for the 2
nd
number of loops. Confirm the value by pushing the
“ENT” button. The input box closes and the value appears in the 4
th
field f
8. Please enter all data up to the 10
th
numeric field ( g - l ).
Information
•
The change of the pitch is only necessary if it is not set to the desired value (the
procedure how to change is described in the programming example 1).
•
The change of the hanger setting is only necessary if it is not set to the desired value (the
procedure how to change is described in the programming example 1).