4
The electrical voltage required to operate this pump can burn, shock, or even cause death. Before,
installing, operating or servicing this pump, please thoroughly read through this manual.
• DO NOT
, splice the power cord.
• DO NOT,
handle or service the pump while it is connected to the power supply.
• ALWAYS
, ensure that the voltage and frequency supplied to the pump are correct. Refer to the
nameplate to determine the correct voltage and frequency.
• ALWAYS
, make sure the pump is grounded properly in accordance to local law.
DO NOT,
connect the ground wire to gas pipe, water pipe, etc… as improper grounding will result in
electrical shock.
WARNING
ELECTRICAL
DANGER
PUMP OPERATION
5
Do not operate this pump anywhere near explosive or flammable material. Serious personal injury,
death, or major property damage will result.
Accidental starting of the pump can cause severe injury or death.
• It is absolutely essential that the rotation of the pump be checked. The pumps covered in this
manual turn counter clockwise as viewed from the motor end.
•
This pump comes with a built in motor protector. In the event of a current overload or overheating,
the pump will stop automatically to protect the motor. After the motor cools down, the motor
protector will automatically reset and the pump can be used again.
•
If the motor protector trips frequently, check for the cause. It could be due to impeller blockage,
wrong/low voltage, etc…
• Do not use pump without the stainer.
WARNING
Airlocks
When an airlock occurs, the pump is running but no water is being moved. This in turn will cause
the motor to overheat and fail. When you suspect an airlock, please refer to Trouble Shooting
section of this manual.
MAINTENANCE
6
If the pump must be disassembled for repair, please contact the Patron Sales Office or an Authorized
Dealer in your area.
