7
In high infestations Luminos 3 Plus,
offers the option to use a glueboard.
Remove paper from the glue board and
slide up the chassis behind the bulbs.
(Fig. 3 & 4)
Figure 3
Figure 4
Fit two end caps into the glue roll and fit
into the right hand side of the catch tray.
Pull sufficient paper from the reel to
reach the drive reel and manually
wind
the paper on until the glue on the upper
surface is securely fitted. Manually
advance the film until the adhesive
coating reaches the drive shaft keeping
the roll under tension (Fig. 5)
Note: The glueboard should only be
used if there is a heavy infestation of
flies.
Figure 5
Place the Catch Tray back into the unit;
holes in the tray align with studs in the
base. Ensure that the gear is to the left,
and meshes with the motor gear. (Fig. 6)
Figure 6
.