Renson Lapure, Руководство пользователя

Страница: 99 / 152

99
EN
TROUBLESHOO
TING
TROUBLESHOOTING
Problem Cause Solution
The remote control is not working. The batteries are empty. Replace the batteries.
The motor has no power. Check the power supply.
Squeaking noise during rolling and un-
rolling of the screen covering. Guide blocks are rubbing against the la-
teral guides. This can be the case, for
example, in areas with heavy pollution
and/or after not having opened/closed
the covering for a long time. Make sure the lateral guides are free of
all dirt and lubricate with Teflon spray.
(e.g. Altemp Q NB 50 Spray from Klüber
Lubrication).
The rain water runs over the bottom rail. It is a heavy rain storm. This is normal; water drainage through
the columns or via the gulleys is limited
in flow rate.
The rainwater is not flowing through the
columns or gulleys because the water
conduits are dirty or clogged. Clean the openings of the water conduits
so that the water can flow away easily.
The bottom rail moves downward in a
slanting position. The lateral guides are dirty. Clean the lateral guides and re-adjust
the screen covering.
Fabric is ‘open’ at the side. Fabric has come out of the lateral guide. Open and close the covering 1x. If the
problem still persists, contact Renson.
Motor stops without indication. Motor is overheated. Wait a few minutes and try again.
Fuse has tripped. Replace the fuse.
System is misaligned. Check the positioning.
System is mechanically blocked. Remove the blockage.
Motor is defective. Replace the motor.