32
en
Fixscreen
®
Minimal - Renovation IM 1
7 • Maintenance
(also see our warranty certificate*)
The product requires little maintenance, but in order to enjoy your product for many years, we do
recommend the following:
• If the screen gets wet during an unexpected shower, you can easily roll up the screen and then,
in better weather, unwind the screen to let it dry. Do not allow the screen to stay rolled up in a
wet condition for more than three days so as to prevent mould and stains.
• Before cleaning, first remove loose dirt with a brush or vacuum cleaner. You can then use a
cleaning product (avoid corrosive products) and remove the remaining dirt with lukewarm
water. Always rinse the screen after cleaning. Do not clean in direct sunlight: quick-drying
soapy water can leave stains on the screen.
Do not use abrasive products to clean.
• Dirty anodised or powder-coated profiles can be cleaned using lukewarm water and a gentle
cleaning product. Never use corrosive or harsh products, abrasive sponges or other scouring
products. We also advise against using high-pressure equipment.
• The hinges and moving parts should be lubricated at least once a year. A dry lubricant (Veidec
Dry Lubricant (G6002790)) should be used for this purpose.
• Plastic sliding tubes can be lubricated with the dry lubricant (Veidec Dry Lubricant
(G6002790)) after cleaning (removing twigs and leaves).
• Regularly check your product for twigs, leaves, birds’ nests, etc. and remove them. Maintain
this product with care.
• As the manufacturer, we recommend having a technical inspection carried out regularly by the
installer, once each year in the case of non-residential construction and in the case of private
sun protection.
• Always use original parts from the manufacturer.
Important to know:
• The electrical connection must be made by a qualified electrician, in accordance with
applicable standards.
• Renson accepts no liability/warranty on the automatic operation of the screen motor, other
than Somfy’s applications.
• Renson cannot guarantee that the communication protocol for building automation and/or
home automation shall be compatible with the screen motor.
• Due to the production process, small colour deviations may occur between colour samples
and the profiles/screens of the sun screen. There may be small colour differences between
components and profiles.
• The canvas may show slight colour nuances and minor imperfections.
• Waffle, herringbone patterns or crease formation on screens are possible and are not covered
by the warranty!
• The colour of the sun screen may change slightly over time, depending on the chosen colours
and designs.
• In screens where the screen moves down vertically due to the weight of the bottom bar or due
to a tensioning system, wrinkles can form in the screen depending on the type of screen.
* This information does not replace the warranty certificate.
