manualshive.com logo in svg

Renovator twist-a-saw, Инструкция по безопасности и эксплуатации, Страница: 8 / 52

Поделиться
Скачать
Renovator twist-a-saw Скачать руководство пользователя страница 8

Page 6 

Twist-A-Saw

™

 Manual

Safety

Personal safety

Follow the guidelines below to ensure your personal safety while operating 

the Twist-A-Saw

™

 .

Safety guideline

•  Stay alert, watch what you are doing and use common sense when 

operating the Twist-A-Saw

™

 . Do not use a power tool while you are 

tired or under the influence of drugs, alcohol or medication.

•  Use personal protective equipment . Always wear eye protection 

and ear protection . If operating in a dusty environment, wear a dusk 

mask (see next page) .

•  Prevent unintentional starting . Ensure the switch is in the off-position 

before connecting to power source, picking up or carrying the tool .

•  Remove any adjusting key or wrench before turning the Twist-A-

Saw

™

 on . A wrench or a key left attached to a rotating part of the 

power tool may result in personal injury .

•  Do not overreach . Keep proper footing and balance at all times .
•  Dress properly . Loose clothes, gloves, jewellery or long hair can be 

caught in moving parts .

•  Keep your hands clear of the work .

Содержание twist-a-saw





















































Отзывы:

Нет отзывов