For some makes or models of vehicles, the cigarette lighter port may not
operate when the ignition is turned off. In such cases, please connect the
trickle charger maintainer to the battery directly.
NOTE
Dark window tints may seriously affect the performance of the trickle
charger maintainer if it is attached to the inner side of the windshield. For
optimal performance, please route the adapter cable through the open
window and place the trickle charger maintainer outside the vehicle.
NOTE
- 07 -
- 08 -
CONNECTING TO THE CIGARETTE LIGHTER PORT
Park the vehicle in direct sunlight with the front facing due south (or north).
WARRANTY
RENOGY products are covered by a 12-month limited warranty from the original
purchase date. If any problems occur, please contact us for assistance. Refer to the last
page of User Guide for contact information.
We only provide after-sales services for products that are sold by RENOGY or retailers
and distributors authorized by RENOGY. If you have purchased your unit from other
channels, please contact your seller for more information about return and warranty.
Please register your purchase(s) directly at www.renogy.com/warranty-registration or
your region’s corresponding website so that we can stay in touch and contact you in the
unlikely event that a safety recall is required.
Connect the trickle charger maintainer to the included SAE to Cigarette Lighter Plug
Cable.
Insert the cigarette lighter plug into the cigarette lighter port.
Attach the trickle charger maintainer to the windshield using included Suction Cups.
Stay clear of fan blades, belts, pulleys, and other parts that can cause injury.
WARNING
NEVER allow the alligator clips or ring terminals to touch each other.
WARNING
When disconnecting the trickle charger maintainer, please follow the above
procedures in reverse order.
WARNING
DO NOT connect the alligator clips or ring terminals to the carburetor, fuel
lines, or sheet-metal body part.
WARNING
FCC Compliance
：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
withstand any interference received, including interference that may cause undesired
operation.
