50
Operation
User Mode
WARNING
z
Before modifying battery parameters in user mode, check the table below and consult the
battery manufacturer to check whether modification is allowed. Incorrect parameter setting
will damage the device and void the warranty.
REGO 12V 60A MPPT Solar Charge Controller
Overvoltage
Shutdown
The default protection voltage is 16V. Improper setting may affect the
safety of the battery. Please consult the battery manufacturer and
check if this voltage value needs to be reset.
Boost Voltage
This value affects whether the battery can be fully charged. Please
consult the battery manufacturer and set the value properly.
Float Voltage
This value affects whether the battery can be fully charged. Please
consult the battery manufacturer and set the value properly.
Equalization Voltage
1. For lead-acid batteries, please consult your battery manufacturer to
obtain the voltage value and then complete the settings according
to the feedback.
2. If equalization charging is not required, set the voltage to boost
voltage.
Undervoltage
Warning
This voltage value affects the life of the battery. Consult the battery
manufacturer and check if this voltage value needs to be set.
Low Voltage
Shutdown
Low Voltage
Reconnect
Boost Duration
Please consult the battery manufacturer if it is necessary to set this
parameter value.
Equalization
Duration
Equalization Interval
Setting the Battery Type
Battery Charging Parameters
User Mode