Rear Panel Connections & Controls
Array Module High Frequency Control
Not all setups are identical and neither are all
rooms. That is why the VAX series non-powered ar-
ray modules include a rear mounted high frequency
level control.
The high frequency level control allows you to adjust
the high frequency output of each array module to
compensate for:
1. the increased loss of high frequency
energy from air loss over distance
2. the increased coupling between array
modules at low frequencies
3. different room sizes and acoustics
They allow you to maintain the proper High/Mid/Low
frequency balance throughout the listening area.
As a general rule use “Flat” when working with a
single cabinet, plus 6 when using 2 cabinets in a
small array and plus 9 in arrays having 3 or more
cabinets.
High Frequency Level Control
VAX101 Connections
Screw Terminal Strip
Inputs
Looping In & Out
Neutrik 4-Pin Speakon Connectors
Point Source Array Modules
Page 12
