5
Do not stand the loudspeaker upright unsupported.
To ensure proper air movement for the cooling of the amplifier module, we recommend a minimum of 2 to 3 feet of clearance in front of the
loudspeaker and 1 inch of clearance from the other cabinet surfaces.
HARDWARE REQUIRED:
- Array model ICL-FRO-M
Four – 1-½” x ¼” fasteners with ½” head appropriate for the wall material and structure
One – Renkus-Heinz, Inc. Hinge Kit Model HK-ICL-F
- Array model ICL-FRO-DUAL-M
Six – 1-½” x ¼” fasteners with ½” head appropriate for the wall material and structure
One – Renkus-heinz, Inc. Hinge Kit Model HK-ICL-F2
- Array model ICL-FRO-TRIP-M
Eight – 1-½” x ¼” fasteners with ½” head appropriate for the wall material and structure
One – Renkus-heinz, Inc. Hinge Kit Model HK-ICL-F3
TOOLS REQUIRED
- Drill
- 5/32” & 5/8” Drill bits
- Socket Driver
- 1/2” Socket
- Philips #2 screwdriver or socket driver
INSTALLATION
NOTE: Each HK series hinge consists of two parts, a male mounting plate and a female mounting plate. The female hinge plates should be
attached to the loudspeakers as shown in the drawings on the following page. The male mounting plates attach to the wall.
Each male mounting plate is provided with 6 mounting holes. Only two fasteners in each male mounting plate, securely attached to a wall,
and two 1/4” toggle bolts are needed to fully satisfy mounting needs and safely secure the Renkus-Heinz IC-Live loudspeakers to the wall.
The drawings on the following page shows the details of wall mounting.
IMPORTANT MOUNTING INSTRUCTIONS
WARNING: THIS APPARATUS MUST BE SECURELY ATTACHED TO THE WALL IN ACCORDANCE WITH INSTALLA-
TION INSTRUCTIONS. FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS MAY RESULT IN INJURY.
