• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
•
Maintenance, modifications and repairs must only be carried out by a technician
or a specialist repair centre.
• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or other professionals.
• Caution, LED light:
- Do not look directly at the LED light!
- Do not look into the beam directly or with optical instruments!
b) Persons and product
•
Never pour liquids over electrical devices or place objects filled with liquid next
to the device. If liquid or an object does enter the device, remove the USB cable.
Discontinue use and take the product to a specialist repair centre.
• Never use the product immediately after it has been brought from a cold room into
a warm one. The condensation that forms might destroy the product. Allow the
product to reach room temperature before connecting it and putting it to use. This
may take several hours.
c) Scanner
•
Only place the scanner on a flat, stable and sufficiently large surface. Protect
valuable or scratch-sensitive furniture surfaces by using a suitable underlay to
prevent damage.
• Lay all connecting cables in such a way that they are not a trip hazard. Do not
step on the cables.
Installation
•
Place the table mat on a flat, stable and
sufficiently large surface. Place the scanner on
the edge of the mat as determined by the cross
in the figure.
• Protect valuable or scratch-sensitive furniture surfaces around the mat by using a suitable
underlay to prevent damage caused by cables or connectors.
Connection
Connect the remote trigger at the rear of the scanner. The trigger has a USB
connector. This is not, however, for connection to a conventional USB port. Never
connect the trigger to a conventional USB port as this may damage the USB port or
the USB device. Only connect the trigger to the scanner.
USB
• Connect the USB cables as shown in the
figure.
• Connect the scanner via the USB-B
socket and the USB cable supplied with
Y-connection to two USB ports on your
computer. Each of the two ports must be
able to deliver a current of 500 mA.
• For more information on the scanning options and operations, please refer to the
manufacturer’s operating instructions on the CD.
Operation on PC
• Install the software supplied on the PC.
Wait until Windows detects the device.
• Fold the folding arm upwards to the horizontal position as far as it will go.
• Switch on the light on the scanner. For further information, see the section ‘Switching light
on/off’
• Start the scanner software on the PC.
Installing and using the software
Pay attention to the manufacturer’s operating instructions supplied on the CD as well as any
information in the software.
Switching light on/off
•
Briefly press the button on the horizontal alarm, marked with a light symbol. This switches
on the LED light on the scanner. Press again to adjust the brightness levels. A fourth press
switches off the light.
Quick guide
Smart scanner RF-ET17 Plus
Item no. 1885109
Intended use
Using its in-built camera, the product can be used to take images of documents, books and
objects which can be saved and edited on a PC. The camera is activated via a remote trigger
(included in the items supplied). The software on the CD supplied can be used to scan and edit
the scanned data, e.g. with text recognition.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g.
in a bathroom) must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product
for purposes other than those described above may damage the product. In addition, improper
use can cause hazards such as a short circuit or fire. Read the operating instructions carefully
and store them in a safe place. If you pass the product on to a third party, please hand over
these operating instructions as well.
This product complies with statutory, national and European regulations. All company and
product names included herein are trademarks of their respective owners. All rights reserved.
Delivery content
• Scanner
• Remote trigger (with 0.9 m USB cable)
• USB cable (200 cm)
• Software CD (12 cm)
• Table mat
• Quick start guide
•
Manufacturer’s operating instructions on CD
Up-to-date operating instructions
Download the up-to-date operating instructions at www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
This symbol reminds you to read the operating instructions included with the
product.
Safety information
Read the operating instructions and safety information carefully. If you do
not follow the safety information and information on proper handling in these
operating instructions, we will assume no liability for any resulting personal
injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a
dangerous plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety instructions and operating instructions of any other
devices which are connected to the product.
• Always comply with the accident prevention regulations for electrical equipment
when using the product in industrial facilities.
• In schools, educational facilities, hobby and DIY workshops, the product must be
operated under the supervision of qualified personnel.
