2
Operating Instructions
RF-HS-150 USB Computer Headset
Item no: 2376915
1 Intended use
The product is a wired stereo headset with microphone. The microphone connects to a PC via USB and is
equipped with inline controls.
Examples of use include online chats, conference calls, and gaming.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
2 Delivery contents
■
Headset
■
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR code shown. Fol-
low the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important informa-
tion in this document. Always read this information carefully.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
5.2 Damage to hearing
■
Do not listen to music at an excessive volume for prolonged periods. This may damage your hearing.
5.3 Handling
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
■
Consult an expert when in doubt about the operation, safety or connection of the appliance.
5.4 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
6 Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
7 Cleaning and care
Clean the product with a dry, fibre-free cloth.
NOTICE! Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
8 Product overview
1
2
3
No.
Part
How to use
1
Microphone
Speak into the microphone to use it.
2
Adjustable headband
Adjust the headband for comfortable wearing.
3
Volume dial
Turn the dial to adjust the volume.
9 Connection
To use the product, connect it to a PC.
Notes:
– The product is plug and play.
– Refer to the “Troubleshooting” section if it does not function correctly.
1. Fully unwind the cable.
2. Connect the USB-A plug to a USB port (min. USB2.0) on the PC.
à
The required drivers install automatically.
à
After the drivers are installed, you can use the product.
10 Troubleshooting
Problem
Suggested solution
When connected to a computer via
USB-A:
■
The PC does not recognize the
product.
■
Product stops working.
■
Try a different USB port on the PC.
■
Disconnect the product, restart the PC, reconnect.
■
Check your PC sound settings. “
USB Audio Device
” should
be selected as the (input / output) device. Refer to your PC
operating system instructions for information about how to do
this.
Microphone and speaker have
screeching sound and/or echo.
■
Lower the volume.
■
Move microphone further away from the mouth.
■
Check that the PC microphone is not too close to the headset.
11 Technical data
Power supply ........................................
5 V/DC, 250 mA via USB
Connection ............................................
USB-A
Impedance.............................................
32 Ω
Input power............................................
max. 30 mW
Frequency range ...................................
20 Hz – 20 kHz
Microphone sensitivity ...........................
56 ±2 dB
Headset sensitivity.................................
105 ±3 dB
Sound pressure level.............................
84.4 dB(A)
Supported OS........................................
MacOS, Windows®, Android™
Cable length ..........................................
150 cm
Operating temperature .........................
20 to +60 °C
Operating humidity ...............................
0 – 70 % RH (non-condensing)
Storage temperature .............................
-25 to +60 °C
Storage humidity ...................................
0 – 70 % RH (non-condensing)
Dimensions (W x H x D) (approx.) ........
140 x 165 x 50 mm
Weight ...................................................
72 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2376915_V1_0821_jh_mh_en
