7 Operation
7.1 Connecting the docking station
1. Connect the USB-C
TM
connector
(3)
to an available USB-C
TM
port on your laptop or mobile device.
Note:
– Mobile devices may only be supported to a limited extent. See section „10 Technische Daten“ for
information on supported mobile devices. Additional drivers or apps may need to be installed in
order to use the docking station.
2. Connect the USB-A plug of the docking station to the USB-A port
(1)
on the product.
Æ
The docking station is now ready for use.
Note:
– Many operating systems already have the necessary drivers pre-installed.
– Required drivers can be obtained directly from the chipset manufacturer (DisplayLink).
7.2 Charging your laptop or mobile device
1. Connect the USB-C
TM
connector
(3)
to an available USB-C
TM
port on your laptop or mobile device.
2. Connect a suitable USB-C™ charger to the USB-C
TM
port
(2)
.
Æ
Your laptop/mobile device will start to charge.
Note:
– The product supports the USB-PD 2.0 standard for charging devices.
8 Cleaning and care
Important:
– Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions, as these
may damage the housing or impair the functioning of the device.
1. Disconnect the product from the connected devices before cleaning.
2. Use a dry, lint-free cloth to clean the product. Do not allow water to get inside the housing. To prevent
scratch marks, do not press too strongly on the surface when cleaning.
9 Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market.
This symbol indicates that this device should not be disposed of as unsorted municipal waste
at the end of its service life.
Owners of WEEE shall dispose of it separately from unsorted municipal waste. Spent batteries
and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed
from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in
a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste.
Conrad provides the following return options
free of charge
(more details on our website):
in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set up by
manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries
outside of Germany.
10 Technical specifications
10.1 Power supply
Input voltage/current ............................. max. 20 V/3 A
Charging power .................................... max. 60 W
Charging standard ................................ USB PD 2.0
10.2 Ambient conditions
Operating/Storage conditions
............... +10 to +60 ºC, 10–85 % RH
10.3 Other
USB standard .......................................
USB 3.1 Gen 1
Data transfer rate ..................................
max. 5 Gbps
Supported operating systems ............... Windows
®
7 (32/64-bit), 8.0 (32/64-bit), 8.1 (32/64-bit),
10 (32/64-bit)
MacOS version 10.14 or later
Dimensions ........................................... 40 mm x 39.5 mm x 11 mm (L x W x H)
Length of connection cable ................... 0.2 m
Weight .................................................. 18 g
Operating instructions
USB-C
TM
to USB-A adapter with
USB-C
TM
port for charging
Item no. 2390409
1 Intended use
This product is designed to extend a USB-A
DisplayLink docking station to enable use with a
laptop or mobile device with a USB-C™ connection.
The product is intended for indoor use only. Do
not use it outdoors. Contact with moisture must be
avoided under all circumstances.
Using the product for purposes other than those
described above may damage the product. Improper
use can cause a short circuit, fire or other hazards.
This product complies with statutory, national and
European regulations. For safety and approval
purposes, you must not rebuild and/or modify the
product.
Read the operating instructions carefully and store
them in a safe place. Make this product available
to third parties only together with the operating
instructions.
All company and product names contained herein
are trademarks of their respective owners. All rights
reserved.
2 Delivery content
USB-C
TM
to USB-A adapter with
USB-C
TM
port for charging
Operating instructions (to download)
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR code shown. Follow
the instructions on the website.
4 Symbols in this document
This symbol warns of hazards that can lead to personal injury. Read the information carefully.
5 Safety information
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling, we
assume no liability for any resulting personal injury or damage to property. Such cases
will invalidate the warranty/guarantee.
5.1 General information
This product is not a toy. Keep it out of the
reach of children and pets.
Do not leave packaging material lying around
carelessly. It may become a dangerous
plaything for children.
Should you have any questions or concerns
after reading this document, please contact our
technical support or a professional technician.
Maintenance, modifications and repairs must
be carried out by a technician or a specialist
repair centre.
5.2 Handling
Please handle the product carefully. Impact, shocks or a fall even from a low height can damage the
product.
5.3 Operating conditions
Do not place the product under any mechanical
stress.
Protect the product from extreme temperatures,
strong jolts, flammable gases, vapours, and
solvents.
Protect the product from high humidity and
moisture.
The product must not be exposed to direct
sunlight.
5.4 Operation
Consult an expert when in doubt about the
operation, safety or connection of the device.
If it is no longer possible to operate the product
safely, stop using it and prevent unauthorised
use. DO NOT attempt to repair the product
yourself. Safe operation can no longer be
guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in
poor ambient conditions or
–
has been subjected to any serious
transport-related stress.
Ensure that cables are not pinched, kinked or
damaged by sharp edges.
Always lay the cables so that nobody can trip
over or become entangled in them. This poses
a risk of injury.
5.5 Connected devices
Always observe the safety information and operating instructions of any other devices which are
connected to the product.
6 Operating elements
1
2
3
1 USB-A port
2 USB-C
TM
port
3 USB-C
TM
connector
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in elec
-
tronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE.
*2390409_v2_0222_02_DS_m_4L_(1)
