Renkforce GX111, Руководство по эксплуатации, Страница: 16 / 48

16
9. Configuration via Text Message
To receive the full functional scope of the GX111, it must first be configured. The entire configuration is performed by
simple text message commands you send to the GX111 (the phone number of the micro SIM card in the GX111) from
your mobile phone.
This method makes it possible to activate, deactivate or change the settings of the GX111 from anywhere.
Alternatively, the GX111 can be configured via the USB interface using PC software (available via www.conrad.com).
These operating instructions do not deal with configuration via PC software. This only describes how the
product can be controlled via a mobile phone, without any other aids.
To protect against unauthorised access, the GX111 generally reacts to authenticated messages only. In a
text message, you authenticate yourself by including the correct SIM PIN of the GX111 (not the one of the
mobile phone on which the text message has been written!).
For your own safety, the SIM PIN number must be changed under all circumstances after commissioning
of the product. This is described in the corresponding chapter.
If the GX111 is in „OFFLINE“ mode (control commands via text message are not possible), the GX111 can
be put into „ONLINE“ mode by pushing the button „S1“ on its side. The standard settings are 15 minutes
for the „ONLINE“ mode and 1425 minutes for the „OFFLINE“ mode (15 + 1425 = 1440 minutes = 24 h).
Introduction into the command format
The text messages to program the GX111 are set up according to the following chart:
<ACTION>
<FUNCTION> <PARAMETER1> <…> <#PIN>
Examples:
SET TEL1 +49177556644221 #1513 (phone book)
RESET TEMP #1513 (alarm off)
TEST TEMP #1513 (query)
ENABLE ALARM #1513 (alarm on)
DISABLE ALARM #1513 (alarm off)
Important!
Every text message sent to the GX111 must end with the PIN set as protection. Without „#<PIN>“ at the
end of the text message, it is discarded and no answering text message will be generated!
The commands and parameters must be separated by a single space each.
If the GX111 does not react, it may be in „OFFLINE“ mode. Push the lateral button „S1“ to wake it up.