Renkforce GX111, Руководство по эксплуатации, Страница: 15 / 48

15
b) Changing the PIN Code to „1513“
Every SIM card has a PIN code. Because this GSM product uses its own PIN processing for reasons of safety, the
SIM card PIN code must be changed to that of the product.
The following steps are required for this:
• The micro SIM card intended for the product must be inserted in a mobile phone. If your mobile phone is not equip-
ped for use with a micro-SIM card, you will need the corresponding adapter.
• According to the operating instructions of the mobile phone, the PIN code must be changed to 1513.
• The micro SIM card with the changed PIN code must be removed from the mobile phone.
• The micro SIM card with the changed PIN code can now be inserted into the GX111 (see next chapter).
We urgently advise against deactivating the SIM card PIN query. In addition to the risk at theft and con-
nected illegal use, deactivation of the PIN function means that the device is used in a non-intended mode.
There may be functional errors!
c) Micro SIM Card Insertion
The micro SIM card with the PIN number „1513“ must be inserted in the intended SIM card holder of the GX111.
After insertion of the micro SIM card, the GX111 is switched on.
During starting of the GX111, the „ERR“ LED flashes at an interval of one second. After a short time, the „GSM“ LED
will flash green (in intervals of ½ second) (network scanning) and after a few seconds, the „GSM“ LED should change
its flashing pattern.
If the „GSM“ LED does not change its flashing pattern, there is no connection to the GSM network. In this case, the
network quality and function of the micro SIM card at the site of the GX111 must be inspected with a separate mobile
phone.
Use a mobile phone to check if the SIM card is activated at all. If the mobile phone cannot log into the GSM network
with the set PIN 1513, there is a problem with the SIM card. In this case, contact the provider of the SIM card.
If an error occurs while connection to the GSM network is established, it is signalled with the „ERR“ LED. In this case,
push the „RESET“ button at the GX111.
If the GX111 used to be used with another SIM card, there is the option of the PIN number in the product
being changed and now no longer matching the default setting „1513“. In this case, the GX111 must be
reset to factory settings (see corresponding chapter farther back in these operating instructions), then the
PIN of the micro SIM card must be set to „1513“ in the mobile phone.
The micro SIM card may have been locked in the meantime and must be unlocked with the PUK. In this
case, use a separate mobile phone and unlock the micro SIM card.