29
10. Operation
a) Setting the operating mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Additionally, it can
be used as a master device with integrated controller to control other connected effect lights synchronously in master-
slave mode, or as slave device via the controller of another effect light.
After connection to the mains, the effect light will perform a reset. Only after this process is completed will
the device be ready.
• Use the display and MENU and ENTER buttons as well as the UP and DOWN buttons to set the operating mode.
• Press the MENU button to select the individual menu items.
• Push the ENTER button.
• Change the values to be set or options with the UP or DOWN buttons.
• Confirm the selection with the ENTER button.
• To go back one level in the menu without changes, push the MENU button once.
Menu overview
For a more detailed explanation of the individual menu items from the table, see the following items of these
instructions.
Menu Item
Option
Function
addr
1-512
Setting the DMX starting address
ChNd
10Ch
10-channel DMX operation
12Ch
12-channel DMX operation
15Ch
15-channel DMX operation
SLNd
NASt
Device is in master mode
SL 1
Device is in slave mode 1 (normal)
SL 2
Device is in slave mode 2 (inverted)
ShNd
Sh 1 - Sh 4
4 different demo shows
Auto
oFF
Automatic mode deactivated
on
Automatic mode activated
SoUn
oFF
Sound-to-light mode deactivated
on
Sound-to-light mode activated
SenS
0-100
Setting of the music sensitivity for sound-to-light operation
bLNd
no
Pause function deactivated
YeS
Pause function activated
Led
oFF
Display switches off after approx. 1 minute
on
Display permanently on
