31
Display
Option
Function
Comment
Addr
001-512
Setting the DMX starting address
UEr
Ur01
Display of the software version
SoUn
on
Sound-to-light mode activated
oFF
Sound-to-light mode deactivated
Led
on
Display permanently on
oFF
Display switches on only after operation of
the FUNC (5) button
SLNd
NASt
Operation as a master device
SL 1
Operation as a slave device
normal slave mode
SL 2
Operation as a slave device
inverted slave mode
ShNd
SP01
All automatic effects alternatingly
SP02
Automatic effect 1
SP03
Automatic effect 2
SP04
Automatic effect 3
SP05
Automatic effect 4
SP06
Automatic effect 5
dISP
dISP
Display aligned normally
dSIP
Display alignment turned by 180°
when the device is installed
turned by 180°
ChNd
1Ch
1-channel DMX operation
7Ch
7-channel DMX operation
b) Use with an External DMX Controller
Each DMX device in a DMX chain requires a so-called DMX starting address to be clearly identified by the
controller. This DMX starting address specifies the first DMX channel to which the effect light responds.
The remaining control channels come after this first DMX channel (DMX starting address).
The effect light requires 1 or 7 free DMX channels.
Setting the DMX operating mode
• Push the button FUNC (5) until "ChNd" is displayed and push the button ENTER (8).
• Select the desired operating mode with the UP (7) and DOWN (6) buttons:
1Ch
1-channel DMX operation
7Ch
7-channel DMX operation
• Push the ENTER button (8) to confirm your selection.
Содержание 1413291
Страница 12: ...12 Übersicht ...
Страница 30: ...30 Overview ...
Страница 48: ...48 Vue d ensemble ...
Страница 66: ...66 Overzicht ...