Renkforce 1384778, Руководство по эксплуатации, Страница: 28 / 66

28
b) Use with an External DMX Controller
Each DMX device in a DMX chain requires a so-called DMX starting address to be clearly identified by the
controller. This DMX starting address specifies the first DMX channel to which the effect light responds.
The remaining control channels come after this first DMX channel (DMX starting address).
The effect light requires 4, 6 or 8 free DMX channels depending on DMX operating mode.
Setting the DMX starting address
• Set the desired DMX starting address (A001-A512) in the menu Addr.
Setting the DMX operating mode
• Set the desired number of DMX channels with the option 4CH / 6CH / 8CH in the menu CHnd.
The following tables provide information about the effects of the settings on the individual DMX channels.
4-channel DMX operation
DMX channel Value Function
1 000-255 Brightness red 0-100%
2 000-255 Brightness green 0-100%
3 000-255 Brightness blue 0-100%
4 000-255 Brightness white 0-100%
6-channel DMX operation
DMX channel Value Function
1 000-255 Brightness red 0-100%
2 000-255 Brightness green 0-100%
3 000-255 Brightness blue 0-100%
4 000-255 Brightness white 0-100%
5 000-255 Total brightness 0-100%
6 000-006 No strobe effect
007-065 Strobe speed slow > fast
066-069 Light off
070-128 Pulsing strobe effect slow > fast
129-132 Light off
133-191 Colour strobe with fade-in effect slow > fast
192-195 Light off
196-255 Colour strobe with fade-out effect slow > fast