This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
Operation
• The light organ can be switched on or off with the on/off switch at the centre of the
control unit.
• The rotary switch “SPEED” is used to set the speed of the light effect (turn to the
right in clockwise direction = increases the speed)
• The right rotary switch “SOUND CONTROL” is used to set the microphone sensitivity
(turn to the right in clockwise direction = increases the sensitivity)
The opening with the integrated microphone (marked “MIC”) is located be-
low the on/off switch. Do not cover this opening.
Maintenance and cleaning
• The product does not require any maintenance and should never be disassembled
for any reason.
The built-in LED bulbs are permanently installed; they cannot be replaced.
• Before you clean the product, switch it off and disconnect it from the mains voltage.
Pull the power adapter from the mains socket.
• The outside of the product should only be cleaned with a clean, soft, dry cloth.
Do not use aggressive cleaning agents or chemical solutions as these can
damage the housing (discolouration) or impair operation.
Do not press too hard on the transparent plastic covers as this might cause
scratches.
Disposal
The product must not be disposed of with the household waste.
Please dispose of the product, when it is no longer of use, according to the
current statutory requirements.
Technical data
a) Light organ
Operating voltage............................... 14 V/DC
Light bulb ............................................. 21 LEDs per light module (firmly mounted, not re-
placeable)
Light modules...................................... 1x red, 1x green, 2x orange, 2x blue
Installation location ........................... dry, enclosed indoor rooms
Ambient conditions ............................ Temperature -10 °C to +35 °C, air humidity 0% to
80% relative, not condensing
Dimensions.......................................... 290 x 150 x 275 mm (W x D x H)
Weight .................................................. 1.58 kg
b) Power adapter
Operating voltage............................... 100 - 240 V/AC, 50/60 Hz
Output................................................... 14 V/DC, 300 mA
