37
l) Use with an External DMX Controller
Each DMX device in a DMX chain requires a so-called DMX starting address to be clearly identified by the
controller. This DMX starting address specifies the first DMX channel to which the effect light responds.
The remaining control channels come after this first DMX channel (DMX starting address).
The effect light requires 1-7 free DMX channels depending on DMX operating mode.
DMX operation always takes precedence over any other mode. Once a signal is pending at the
DMX input DMX IN, the other operating modes are deactivated. The display shows the DMX
starting address.
Setting the DMX starting address
• Set the desired DMX starting address (001-512) in the menu Addr.
Setting the DMX operating mode
• Set the desired number of DMX channels in the menu ChNd (1Ch-7Ch).
The following tables provide information about the effects of the settings on the individual DMX channels.
1-channel DMX operation
DMX channel
Value
Function
1
000-255
29 different colour pre-settings (see table 1)
2-channel DMX operation
DMX channel
Value
Function
1
000-255
29 different colour pre-settings (see table 1)
2
000-255
Total brightness 0-100%
3-channel DMX operation
DMX channel
Value
Function
1
000-255
Brightness red 0-100%
2
000-255
Brightness green 0-100%
3
000-255
Brightness blue 0-100%
4-channel DMX operation
DMX channel
Value
Function
1
000-255
Brightness red 0-100%
2
000-255
Brightness green 0-100%
3
000-255
Brightness blue 0-100%
4
000-255
Total brightness 0-100%
