This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
V1_1214_02-ETS-Mkd
• If necessary, lock the trigger using the locking lever (11) for continuous watering
(see illustration below).
• Close the water tap after use.
• Pull down the ring from the mounting in order to disconnect the spray head or hose
connector from the hose.
Maintenance and cleaning
• Besides occasional cleaning, the product is maintenance-free.
• Use a damp cloth for cleaning. Use a mild cleaning agent to clean off tougher dirt.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical
solutions.
• Store the product at a dry, clean location shielded from direct sunlight and out of
the reach of children.
Disposal
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
a) Item no. 1275343
Operating pressure .............................3 bar
Burst pressure .....................................14 bar
Hose Ø...................................................6 mm (internal), 9.5 mm (external)
Water inlet Ø ........................................15 mm
Wall thickness .....................................1.5 mm
Operating conditions ..........................-10 to +50 ºC, 0 – 100 % RH
Storage conditions..............................-10 to +50 ºC, 0 – 100 % RH
Length ...................................................5 – 15 m
Weight ...................................................430 g (hose)
90 g (spray head)
40 g (connector)
b) Item no. 1275356
Operating pressure .............................3 bar
Burst pressure .....................................14 bar
Hose Ø...................................................6.3 mm (internal), 9.5 mm (external)
Water inlet Ø ........................................15 mm
Wall thickness .....................................1,5 mm
Operating conditions ..........................-10 to +50 ºC, 0 – 100 % RH
Storage conditions..............................-10 to +50 ºC, 0 – 100 % RH
Length ...................................................10 – 30 m
Weight ...................................................940 g (hose)
90 g (spray head)
40 g (connector)
