RS-MG41-1 Composite Multi-Gas Detector User Manual V1.0
Shandong Renke Control Technology Co., Ltd.
www.renkeer.com
9
an alarm state
8
Storage status
The display
■
indicates that the device is in the state of stopping
data storage. When it displays
▶
, the device is in the state of
storing data
9
buzzer
As shown in the figure, the buzzer is normally enabled and
displayed when the buzzer is disabled:
10
Battery
When the alarm is off, the buzzer cannot be enabled
11
Proportion
Display the current remaining battery level
5.3Instructions
1. In the shutdown state, press and hold the 2S confirmation key, the device detects whether the
buzzer, flash, and vibration are used normally, and the device enters the main interface
2. On the main page, press cyclically to enter the password interface. The default password is
0000. Press the cycle to move the cursor to confirm, and click the confirm button to enter the
menu interface. As shown in Figure 1:
figure 1
5.3.1System setup instructions
Move the cursor to the corresponding icon and click the confirmation key to enter the setting
interface