Renishaw VIONiC RESM20 Скачать руководство пользователя страница 3

Страница: 3 / 22

Product compliance

Renishaw plc declares that the VIONiC

™

encoder system complies with the applicable standards

and regulations. A copy of the EU declaration of conformity is available from our website at

www.renishaw.com/productcompliance

Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

The user is cautioned that any changes or modifications not expressly approved by Renishaw plc or

authorised representative could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

NOTE:

This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used

with the unit to ensure compliance.

Further information

Further information relating to the VIONiC encoder range can be found in the

VIONiC series encoder

system

data sheet (Renishaw part no. L-9517-9678),

Advanced Diagnostic Tool ADTi-100

data sheet

(Renishaw part no. L-9517-9699),

Advanced Diagnostic Tool ADTi-100 and ADT View software

quick-start

guide (Renishaw part no. M-6195-9321), and the

Advanced Diagnostic Tool ADTi-100 and ADT View

software

user guide (Renishaw part no. M-6195-9413). These can be downloaded from our website

www.renishaw.com/vionicdownloads

and are also available from your local Renishaw representative.

Legal notices

Copyright

© 2016–2021 Renishaw plc. All rights reserved.
This document may not be copied or reproduced in whole or in part, or transferred to any other media or
language by any means, without the prior written permission of Renishaw.

Trade marks

RENISHAW

and the probe symbol are registered trade marks of Renishaw plc. Renishaw product

names, designations and the mark ‘apply innovation’ are trade marks of Renishaw plc or its subsidiaries.
Other brand, product or company names are trade marks of their respective owners.

Patents

Features of Renishaw’s encoder systems and similar products are the subjects of the following patents
and patent applications:

Disclaimer

WHILE CONSIDERABLE EFFORT WAS MADE TO VERIFY THE ACCURACY OF THIS DOCUMENT AT
PUBLICATION, ALL WARRANTIES, CONDITIONS, REPRESENTATIONS AND LIABILITY, HOWSOEVER
ARISING, ARE EXCLUDED TO THE EXTENT PERMITTED BY LAW.
RENISHAW RESERVES THE RIGHT TO MAKE CHANGES TO THIS DOCUMENT AND TO THE
EQUIPMENT, AND/OR SOFTWARE AND THE SPECIFICATION DESCRIBED HEREIN WITHOUT
OBLIGATION TO PROVIDE NOTICE OF SUCH CHANGES.

Terms and Conditions and Warranty

Unless you and Renishaw have agreed and signed a separate written agreement, the equipment and/or
software are sold subject to the Renishaw Standard Terms and Conditions supplied with such equipment

and/or software, or available on request from your local Renishaw office.

Renishaw warrants its equipment and software for a limited period (as set out in the Standard Terms

and Conditions), provided that they are installed and used exactly as defined in associated Renishaw
documentation. You should consult these Standard Terms and Conditions to find out the full details of your

warranty.
Equipment and/or software purchased by you from a third-party supplier is subject to separate terms and
conditions supplied with such equipment and/or software. You should contact your third-party supplier for
details.

EP1173731

IL146001

JP4750998

US6775008

CN100543424

EP1766334

JP4932706

US7659992

CN100507454

JP5386081

US7550710

CN101300463