SPA1 commissioning sequence
9
2.2 Renicis
sequence
2.2.1 Initial
steps
1.
Start the commissioning process by ensuring the step icon on the toolbar is not indented and then
click on the GO icon on the toolbar, as shown in the figure 1 below:
Figure 1
2.
The Renicis commissioning step list will now be displayed within a window that will open on the
desktop, as shown in the figure 2 below:
Figure 2
3.
Highlight the Welcome step within the list and then click on the GoToStep button to start the
commissioning process.
4.
Proceed through the following Renicis steps following the instructions:
•
Welcome
•
Connector and interface details
•
Check
CMM
•
Test
link
•
Emergency
stop
•
Other safety matters
•
Check read heads
